Mercury 25 EFI Service Manual page 399

10. Assemble the jam nut to the end of the threads on the trim rod.
11. Apply Loctite Threadlocker 271 to the cylinder rod threads.
12. Assemble the rod eye against the jam nut on the trim rod.
13. Tighten the jam nut against the rod eye. Tighten the jam nut to the specified torque.
a - Outer cylinder tube
b - Trim cylinder rod
c - Jam nut
d - Rod eye
Tube Ref No.
Loctite 271 Threadlocker
7
Description
Cylinder rod jam nut
14. Install the trim cylinder to the base of the power trim assembly. Tighten the trim cylinder to the specified torque.
Description
Trim cylinder
15. Fill the power trim reservoir with fluid.
Tube Ref No.
Power Trim and Steering
114
Fluid
90-8M0105568 eng MARCH 2016
a
Description
a - Trim cylinder
b - Power trim assembly base
a
b
18297
Description
b
Where Used
Cylinder rod threads
Where Used
Power trim system reservoir
© 2016 Mercury Marine
Power Trim
c
d
18286
Part No.
92-809819
Nm lb. in.
35
Nm lb. in.
155
Part No.
92-858074K01
Page 5B-37
lb. ft.
25.8
lb. ft.
114