Starter Motor Disassembly - Mercury 25 EFI Service Manual

Charging and Starting System
6. Remove the two bolts and washers securing the VST to the cylinder block.
7. Lift the VST off the lower VST mounting grommet.
a
b
8. Remove the two bolts securing the starter brace to the cylinder block.
9. Remove the two bolts securing the starter to the cylinder block. Remove the starter.
a
b

Starter Motor Disassembly

1. Push the pinion stopper down and remove the circlip.
2. Remove the pinion stopper, bendix spring, and bendix.
a
Page 2B-40
a -
b -
10497
a - Circlip
b - Pinion stopper
b c - Bendix
c
10500
© 2016 Mercury Marine
a - High pressure fuel hose clamp
b - Bolts and washer securing VST
c
c - Air vent assembly hose
d - Oil filter
d
10495
Bolts securing the starter to the cylinder block (2)
Bolts securing the starter brace to the cylinder block (2)
90-8M0105568 eng MARCH 2016