Mercury 25 EFI Service Manual page 255

8. Remove the crankshaft seals.
a
9. Reinstall the connecting rod caps. Tighten the connecting rod cap bolts finger tight.
10. Push the piston and connecting rod assembly out of the cylinder block.
11. Remove the main bearings from the cylinder block and crankcase cover.
90-8M0105568 eng MARCH 2016
a - Crankshaft seals (2)
b - Connecting rod caps with bolts
a
b
11603
I
© 2016 Mercury Marine
II
11605
11606
Cylinder Block/Crankcase
Page 4A-13