Outboard Installation
5.
Secure the link rod bolt so it does not loosen and tighten the locknut to the specified torque.
b
a
Description
Link rod bolt
Locknut
6.
Secure the battery cables to the throttle/shift cable with two cable ties to prevent contact with the steering components.
Electrical Harness, Battery Connection, Fuel Tanks
Remote Wiring Harness
1.
Remove the three access cover bolts. Remove the access cover and cable rubber grommet.
2.
Remove the cotter pin retainers and washers from the shift actuating lever, shift link, and throttle actuating lever.
3.
Remove the shift link from the shift actuating lever.
Page 1D-14
59500
© 2016 Mercury Marine
a -
Link rod bolt
b -
Locknut
59502
10113
90-8M0105568 eng MARCH 2016
Nm
lb‑in.
27
–
27
–
lb‑ft
20
20