7.
Align the harness connector bracket with the intake manifold bolt hole. Secure the harness connector bracket with a bolt.
Tighten the bolt to the specified torque.
Description
Harness connector bracket bolt
8.
Install the remaining timing belt cover bolts. Tighten the timing belt cover bolts and the recoil housing bolts to the specified
torque.
a
Description
Recoil retaining bolts (3)
Timing belt cover retaining bolts (4)
Neutral Interlock Cable Adjustment
1.
Ensure the tiller handle control cables are properly adjusted.
2.
Ensure the tiller handle is in neutral.
90-8M0105568 eng MARCH 2016
a -
b -
b
9698
© 2016 Mercury Marine
Recoil Starter
20523
Nm
lb. in.
6
53
Bolts securing the recoil assembly
(3)
Bolts securing timing belt cover (4)
Nm
lb. in.
6
53
6
53
Page 8A-13
lb. ft.
lb. ft.