Mercury 25 EFI Service Manual page 210

Service Procedures
2. Install the fuel inlet needle to the float.
3. Insert the float pin through the float
4. Install the float/needle assembly onto the VST cover. Secure the float/needle assembly to the cover with float pin screw.
Tighten the float pin screw to the specified torque.
Description
Float pin screw
High Pressure Fuel Pump Assembly Installation
1. Push the high pressure fuel pump grommet onto the VST cover. Ensure the high pressure fuel pump grommet is seated
and level on the VST cover.
Page 3C-26
a
a - Float
b - Float pin screw
c - Float pin
b
c
10351
© 2016 Mercury Marine
10349
Nm
4
10353
90-8M0105568 eng MARCH 2016
lb. in. lb. ft.
35