Mercury 25 EFI Service Manual page 350

Clamp/Swivel Bracket, Driveshaft Housing
3. Place the flat washers in between the bosses and the reverse lock hook.
a
a - Spring
b - Boss
c - Flat washer (2)
d - Hook on spring
e - Reverse lock hook
4. Install one shoulder bolt on each side of the reverse lock hook. Ensure that the shoulder is properly located in the hole in
the reverse lock hook. Tighten the shoulder bolt to specified torque.
c
Description
Reverse lock hook shoulder bolt
5. Attach the reverse lock link to the upper shift shaft.
Page 5A-44
b
a
a -
b -
c -
a
b
20830
© 2016 Mercury Marine
d
c
Reverse lock hook
Shoulder bolt (2)
Spring
90-8M0105568 eng MARCH 2016
e
20832
Nm lb. in. lb. ft.
11 97.3