Mercury 25 EFI Service Manual page 537

4. Unthread the lower cable nut off the cable. Insert the cable wire into the slot in the retainer plate and attach the cable to the
retainer plate with the cable nuts. Tighten the cable nuts during adjustment.
5. Attach the bottom end of the cable to the shift cam with a flat washer and retainer.
a
e
f
a - Cable nuts
b - Retainer plate
c - Clamp
d - Neutral interlock cable
e - Retainer
f - Flat washer
Adjustment
1. Position the remote control handle into neutral position.
2. Adjust the cable nuts so the neutral interlock cable ball is centered on the recoil lock. Tighten the nuts.
90-8M0105568 eng MARCH 2016
b
a
a - Cable nuts
25977
© 2016 Mercury Marine
Jet Drive Outboard
c
d
25976
Page 9A-25