Mercury 25 EFI Service Manual page 332

Clamp/Swivel Bracket, Driveshaft Housing
7. Install the swivel bracket/clamp bracket/steering arm assembly onto the upper motor mount bolts.
a
8. Install a washer, locking plate, and nut on each upper motor mount bolt. Torque the nut to specified torque.
Description
Upper motor mount nut
9. Bend each locking plate tab against the nut to prevent the nut from loosening.
b
10. Install the lower motor mounts. Refer to Lower Motor Mount Replacement, preceding.
11. On manual tilt models:
a. Assemble the reverse lock link to the upper shift shaft.
b. Install the reverse lock link into the bushing and reverse lock hook.
Page 5A-26
b
d
a
c
© 2016 Mercury Marine
a - Driveshaft housing
b - Steering arm
c - Clamp bracket assembly
d - Swivel bracket
c
18821
a -
b -
c -
d -
d
18793
Nm lb. in.
20.3 179.7
Washer
Locking plate
Nut
Upper motor mount bolt
90-8M0105568 eng MARCH 2016
lb. ft.