Mercury 25 EFI Service Manual page 471

8. Attach the throttle link rod to the throttle.
c
d
Description
Throttle arm bracket bolts (2)
9. Install the shift arm and bracket.
10. Attach the harness clip.
11. Install the two bolts. Tighten the two bolts to the specified torque.
a
b
a - Shift arm
b - Shift arm bracket bolt (2)
c - Harness clamp
d - Throttle arm bracket
e - Throttle arm bracket bolt (2)
Description
Shift arm bracket bolts (2)
12. Install the shift rod, throttle cable, and shift cable.
13. Install the cotter pins and washers on the shift rod.
14. Install the cotter pins and washers on the remote control throttle and shift cables.
90-8M0105568 eng MARCH 2016
b
a
c
e
e
d
© 2016 Mercury Marine
Throttle/Shift Linkage
a - Throttle
b - Throttle link rod
c - Throttle arm
d - Bolt (2)
e - Remote control bracket bolt
(2)
18941
Nm lb. in.
6 53
18942
Nm lb. in.
6 53
lb. ft.
lb. ft.
Page 7A-19