Querythemacaddress; Apply Network Settings; Changetheipaddress(Static); Querythesubnetmask - Lightware HDMI-TPS-RX110AY Series User Manual


  
7.LW3Programmers'Reference
7.8.4. Change the IP Address (Static)
Command and Response
SET·/MANAGEMENT/NETWORK.StaticIpAddress=<IP_address>
Î
pw·/MANAGEMENT/NETWORK.StaticIpAddress=<IP_address>
Í
Example
Î SET/MANAGEMENT/NETWORK.StaticIpAddress=192.168.0.85
Í pw/MANAGEMENT/NETWORK.StaticIpAddress=192.168.0.85
7.8.5. Query the Subnet Mask
Command and Response
Î GET·/MANAGEMENT/NETWORK.NetworkMask
pr·/MANAGEMENT/NETWORK.NetworkMask=<netmask>
Í
Example
Î GET/MANAGEMENT/NETWORK.NetworkMask
Í pr/MANAGEMENT/NETWORK.NetworkMask=255.255.255.0
7.8.6. Change the Subnet Mask (Static)
Command and Response
SET·/MANAGEMENT/NETWORK.StaticNetworkMask=<netmask>
Î
pw·/MANAGEMENT/NETWORK.StaticNetworkMask=<netmask>
Í
Example
Î SET/MANAGEMENT/NETWORK.StaticNetworkMask=255.255.255.0
Í pw/MANAGEMENT/NETWORK.StaticNetworkMask=255.255.255.0
7.8.7. Query the Gateway Address
Command and Response
Î GET·/MANAGEMENT/NETWORK.GatewayAddress
pr·/MANAGEMENT/NETWORK.GatewayAddress=<gw_address>
Í
Example
Î GET/MANAGEMENT/NETWORK.GatewayAddress
Í pr/MANAGEMENT/NETWORK.GatewayAddress=192.168.0.1
HDMI-TPS-RX110AY series – User's Manual
7.8.8. Change the Gateway Address (Static)
Command and Response
SET·/MANAGEMENT/NETWORK.StaticGatewayAddress=<gw_address>
Î
pw·/MANAGEMENT/NETWORK.StaticGatewayAddress=<gw_address>
Í
Example
Î SET/MANAGEMENT/NETWORK.StaticGatewayAddress=192.168.0.5
Í pw/MANAGEMENT/NETWORK.StaticGatewayAddress=192.168.0.5
7.8.9. Query the MAC Address
Command and Response
Î GET·/MANAGEMENT/NETWORK.MacAddress
pr·/MANAGEMENT/NETWORK.MacAddress=<MAC_address>
Í
Example
Î GET/MANAGEMENT/NETWORK.MacAddress
Í pr/MANAGEMENT/NETWORK.MacAddress=A8:D2:36:00:43:12
7.8.10. Apply Network Settings
Calling the method results all network settings are applied in the device.
Command and Response
Î CALL·/MANAGEMENT/NETWORK.ApplySettings()
Í mO·/MANAGEMENT/NETWORK.ApplySettings
Example
Î CALL/MANAGEMENT/NETWORK.ApplySettings()
Í mO/MANAGEMENT/NETWORK.ApplySettings
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
79