Overview; Product Description; Noise Emission Information; Identifying The Parts Of The Processor Referred To In This Operator Manual - Kodak X-Omat 1000 Operator's Manual

Section 1: Overview

Product Description

Model Electrical Requirements
1000 Processor 220/230/240 V AC, 50/60 Hz
1000J Processor 100 V AC, 50/60 Hz
1000A Processor 120 V AC, 50/60 Hz

Noise Emission Information

Operator position full system operating mode:
• Sound Pressure Level54 dB(A)L
• Instantaneous Peak Values > or = 130dB(C)None
Sound Power Level65 dB(A)
(1)
Measured in accordance with DIN 45635 in a Hemi-Anechoic chamber
Pressure Level L is < 85 dB(A)
A

Identifying the Parts of the Processor Referred to in this Operator Manual

Overall View of the Processor and the Operator Controls
Figure 1
1
2
H164_0026BCA
H164_0026BC
Item No. Control
3 Dryer Temperature
Control Knob
4 "Service"
5 "High" s
6 "Ready" »
7 "Low" t
8 [ RUN ]
9 [ DEV. ]
10 [ FIX. ]
9B8942 – November 1997
A (1)
(2)
3
Rotates to adjust the temperature of the air in the Dryer.
Illuminates when the service provider should be contacted.
Illuminates when the developer temperature is over the setpoint.
Illuminates when the developer temperature is correct for processing film. It blinks
when either film is processing or the Wash Tank is filling with water.
Illuminates when the developer temperature is below the setpoint.
Manually starts one processing cycle. Releases the Processor from Standby
Mode.
Manually delivers one developer replenishment cycle.
Manually delivers one fixer replenishment cycle.
The KODAK X-OMAT 1000, 1000A, and 1000J
Processors are fully automatic table-top, x-ray film
Processors featuring easy installation and
maintenance, reliability, and optimum image quality.
(2)
4
Service
5
High
6
Ready
Low
7
Dev. Temperature
Description

Overview

Not required when the Sound
8
RUN
9
DEV.
FIX.
10
Rep.
3