Adjusting The Tension Of The Drive Chain - Kodak X-Omat 1000 Service Manual

Adjusting the Tension of the DRIVE CHAIN

FRONT COVER
decrease
tension
TENSION
SPROCKET
[1] Remove the DRYER RACK.
Important
Do not remove the 2 SCREWS.
[2] Loosen the 2 SCREWS.
[3] Remove the FRONT COVER.
Important
Do not remove the SCREW.
[4] Loosen the SCREW on the TENSION SPROCKET.
[5] Adjust the tension of the CHAIN by moving the TENSION SPROCKET.
[6] Tighten the SCREW on the TENSION SPROCKET.
[7] Install the FRONT COVER on the RACK.
[8] Tighten the 2 SCREWS.
[9] Install the DRYER RACK into the PROCESSOR.
9B8949 – 10SEP02
2 SCREWS
increase
tension
DRYER RACK
SCREW
CHAIN
H164_0081HCA
Adjustments
H164_0081HC
47