Communicating with Christie APS
Series
Understand the information and procedures for communicating with Christie APS Series from a remote
location. You can communicate with the projector through the RS232 IN port.
Model name
•
LWU560-APS
•
LWU660-APS
Connecting to the projector RS232 IN port
Communicate with the projector through the RS232 IN port.
1. Connect one end of a null standard nine-pin female to female modem cable to the projector RS232 IN
port.
2. Connect the other end of the null standard nine-pin female to female modem cable to a computer.
3. Connect PIN 2 to PIN 3, PIN 3 to PIN 2 and PIN 5 to PIN 5.
RS232 communication parameters
The RS232 IN port has several communication parameters.
Parameter
Default baud rate
Parity
Data bits
Stop bits
Flow control
APS Series Technical Reference
020-103593-01 Rev. 1 (07-2022)
Copyright
2022 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Value
19200
None
8
1
None
6