Special characters for text
To use special characters in the API commands, you must use a two-character combination.
Special character
"
\
(
)
Line break
Send arbitrary code
Sample messages and their meaning
For a more detailed understanding of messages and their meaning, review the provided sample
messages.
Sample messages for a single projector
Messages can be sent and received for a single projector.
Message format
(Code Data)
(Code+Subcode Data)
(Code?)
(Code+Subcode?)
(Code!Data)
(Code+Subcode!Data)
($Code Data)
$
Christie TruLife+ Technical Reference–Serial Commands
020-103316-07 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Two-character
Description
combination
\"
Double quotation mark
\\
Backslash
\(
Left parenthesis
\)
Right parenthesis
\n
New line—If the text can be displayed on more than one line,
this sets the line break.
\h##
Sends one arbitrary code defined by the two hexadecimal
digits ##.
Function
SET Power on
SET input port configuration
REQUEST (what is current power
state?)
REQUEST (what is current input port
configuration?)
REPLY (power state is 1 "on")
REPLY (input port configuration is 1
"One-Port")
SET AND ACKNOWLEDGE MESSAGE
(change test pattern and request
acknowledge)
REPLY with acknowledgment (from
projector)
Communicating with Christie TruLife+
Example
(PWR 1)
(SIN+PORT 1)
(PWR?)
(SIN+PORT?)
(PWR!001 "On")
(SIN+PORT!001 "One-Port")
($ITP 1)
$
11