Led Status Indicators; Connecting The Projector To A Network; Connecting The Devices To The 3D Port - Christie CP2309-RGB Installation And Setup Manual

LED Color
Red

LED status indicators

Identify the LED state colors and meaning.
LED Color
HUB Green
Orange
Red
SMS Green
Orange
Red
INPUT Green
Orange
Red
Power Green
Red
No LED

Connecting the projector to a network

The CP2309-RGB projectors can be connected to various media devices and wired networks.
For detailed information on connecting the projector to a device or network, see the CP2309-RGB User
Guide (P/N: 020-103081-XX).

Connecting the devices to the 3D port

For information on connecting devices to the 3D port on the projector, refer to the product
documentation for the device you are using.
CP2309-RGB Installation and Setup Guide
020-103078-04 Rev. 1 (11-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Connecting devices and establishing communication
State Description
Solid An error has occurred. Restart the Christie Integrated Media
Block (IMB). If the LED remains red, return the Christie IMB
to Christie
Description
FPGA video processing is running correctly.
FPGA video processing is not configured.
A failure exists with the FPGA video processing.
Screen management system (SMS) is running correctly.
The SMS or system controller has not booted.
A failure exists with the SMS or system controller.
FPGA video input is running correctly.
FPGA video input is not configured.
A failure exists with the FPGA video input.
The low voltage power supply (LVPS) is operating.
A failure exists with the LVPS.
The LED is not illuminated when the LVPS is not on.
29