Removing The Battery; Removing The Battery From Gt2715, Gt2712, Gt2710, Gt2512, Gt2510-V, Or Gt2510F - Mitsubishi Electric GOT2000 Series User Manual

6.11 Removing the Battery

The battery removal procedure differs depending on the GOT models.
➠
6.11.1 Removing the battery from GT2715, GT2712, GT2710, GT2512,
GT2510-V, or GT2510F
The following shows the battery removal procedure, taking GT2712 as an example.
Step 1.
Make sure that the GOT power is off.
Step 2.
The battery is stored in the GOT rear face.
Open the battery cover as shown below.
Step 3.
After removing the battery from the battery holder of the GOT, unplug the connector.
The GOT-side connector depends on whether the GOT has a battery extension cable.
• Without a battery extension cable
Unplug the battery connector from the GOT connector.
• With a battery extension cable
Unplug the battery connector from the battery extension cable connector of the GOT.
Without a battery extension cable
The GT27 models with the following hardware versions have no battery extension cable.
• GT2715: Version G or later (manufactured in September 2014)
• GT2712: Version M or later (manufactured in September 2014)
• GT2710: Version Nor later (manufactured in September 2014)
6 - 62

6.11 Removing the Battery

6.11.1 Removing the battery from GT2715, GT2712, GT2710, GT2512, GT2510-V, or GT2510F

6.11.2 Removing the battery from GT2708, GT2705, GT2710 or GT2508
6.11.3 Removing the battery from GT2510-WX or GT2507-W
6.11.4 Removing the battery from GT2506HS-V
6.11.5 Removing the battery from GT2310 or GT2308
6.11.6 Removing the battery from GT2505, GT2107, GT2105, GT2104-R, GT2104-P
Battery
Battery cover
Black cable
Red cable
Battery Connector
Battery cover
Connector
Battery extension cable
Black cable
Red cable
Battery Connector
With a battery extension cable
Battery cover
Black cable
Red cable