Battery Changing Timing And Method - Mitsubishi Electric A960GOT User Manual

6 HANDLING

6.5.2 Battery changing timing and method

6 - 22
This section provides a battery changing method when the PC card used is the SRAM
type.
(1) How to check for battery low
The GOT checks for a battery low of the memory card loaded. (Only when the
memory card access switch is ON)
The battery low checking methods are given below.
1) Using the self-diagnostic function to check
When a battery low occurs, the corresponding message appears on the self-
diagnostic screen.
For the details, refer to the [GOT-A900 Series Operating Manual (GT Works
Version5/GT Designer Version5 compatible Extended·Option Functions
Manual)].
2) Using the alarm list display (system alarm) function to check
When a battery low occurs, the error warning message and battery low error
code appear on the monitor screen.
For the details, refer to the [GT Designer Help Function].
(2) Battery life
For the PC card backup time, refer to the instruction manual attached to the
memory card used.
(3) Battery changing
For the PC card battery changing method, refer to the instruction manual
attached to the memory card used.
POINT
This section does not apply to the flash PC card as it has no battery.
MELSEC-GOT
6 - 22