Installing The Battery; Installing The Battery To Gt2715, Gt2712, Gt2710, Gt2512 Or Gt2510 - Mitsubishi Electric GOT2000 Series User Manual

6.9

Installing the Battery

Install a battery to the GOT before the first startup.
The following shows the procedure for installing a battery.(Described with the GOT rear face facing up.)
The battery installation procedure differs depending on the GOT models.
➠
6.9.1

Installing the battery to GT2715, GT2712, GT2710, GT2512 or GT2510

The following shows the battery installation procedure, taking GT2712 as an example.
Step 1.
Make sure that the GOT power is off.
Step 2.
Install the battery to the GOT rear face.
Open the battery cover as shown below.
Step 3.
To replace the battery, remove the old battery, and then disconnect the connector.
For information on how to remove the battery, refer to the following.
➠
6 - 40

6.9 Installing the Battery

POINT POINT POINT
(1) Battery
• GT27, GT25:
GT27 and GT25 come with a battery in the battery holder. Before using GT27 and GT25,
connect the battery connector to the GOT connector.
• GT23 :
Batteries for GT23 (GT11-50BAT) are sold separately. Purchase a battery before using
GT23, mount it to the GOT, and connect the GOT connector to battery connector.
• GT2104-R :
GT2104-R come with a battery in the battery holder.
• GT2103-P :
Installing a battery is not required for GT2103-P. (GT2103-P holds the data by the built-in
flash ROM.)
(2) battery replacement time
• GT27, GT25, GT23 :
To replace the battery, leave the GOT on for more than 10 minutes before replacing the
battery.Replace the battery within 5 minutes.
• GT2104-R :
Replace the battery within 30 seconds.
6.9.1 Installing the battery to GT2715, GT2712, GT2710, GT2512 or GT2510
6.9.2 Installing the battery to GT2708, GT2705, or GT2508
6.9.3 Installing the battery to GT2310 or GT2308
6.9.4 Installing the battery to GT2107, GT2105, GT2104-R, GT2104-P
6.10 Removing the Battery
Battery cover