Siemens SINAMICS S Series List Manual page 1066

Parameters
List of parameters
r10055 SI TM54F communication status drive-specific / SI comm_stat drv
TM54F_MA, Can be changed: -
TM54F_SL
Data type: Unsigned32
P-Group: Safety Integrated
Not for motor type: -
Min
-
Description: Displays the communication status of the individual drives with the the Terminal Module 54F (TM54F).
For r10055 = 0, the following applies:
All drives assigned in p10010 communicate with the TM54F.
Bit field: Bit Signal name
00 Communication between drive 1 and
TM54F
01 Communication between drive 2 and
TM54F
02 Communication between drive 3 and
TM54F
03 Communication between drive 4 and
TM54F
04 Communication between drive 5 and
TM54F
05 Communication between drive 6 and
TM54F
r10056.0 CO/BO: SI Status / SI stat
TM54F_MA Can be changed: -
Data type: Unsigned32
P-Group: Safety Integrated
Not for motor type: -
Min
-
Description: Displays the status of the Terminal Module 54F (TM54F).
Bit field: Bit Signal name
00 Test stop status
p10061 SI password input TM54F / SI password inp
TM54F_MA, Can be changed: T
TM54F_SL
Data type: Unsigned32
P-Group: Safety Integrated
Not for motor type: -
Min
0000 hex
Description: Enters the Safety Integrated password for the Terminal Module 54F (TM54F).
This password is required to change the safety-relevant parameters.
1-1066
Calculated: -
Dynamic index: -
Units group: -
Max
-
1 signal
Not configured
Not configured
Not configured
Not configured
Not configured
Not configured
Calculated: -
Dynamic index: -
Units group: -
Max
-
1 signal
Active
Calculated: -
Dynamic index: -
Units group: -
Max
FFFF FFFF hex
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Access level: 3
Func. diagram: 2846
Unit selection: -
Expert list: 1
Factory setting
-
0 signal FP
Configured -
Configured -
Configured -
Configured -
Configured -
Configured -
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
0 signal FP
Inactive -
Access level: 3
Func. diagram: 2846
Unit selection: -
Expert list: 1
Factory setting
0000 hex