Siemens SINAMICS S Series List Manual page 1429

3.1.2 Explanation of the List of Faults and Alarms
The data in the following example has been chosen at random. A description can
contain the information listed below. Some of the information is optional.
The list of faults and alarms (See Section 3.2) has the following layout:
- - - - - - - - - - - - - - - - - - - - - - - - - Start of example - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Axxxxx (F, N) Fault location (optional): Name
Drive object: List of objects.
Reaction: NONE
Acknowledg- NONE
ment:
Cause: Description of possible causes.
Fault value (r0949, interpret format): or alarm value (r2124, interpret format): (optional)
Information about fault or alarm values (optional).
Remedy: Description of possible remedies.
Reaction to F: A_INFEED: OFF2 (OFF1, NONE)
SERVO: NONE (OFF1, OFF2, OFF3)
VECTOR: NONE (OFF1, OFF2, OFF3)
Acknowledge- IMMEDIATELY (POWER ON)
ment for F:
Reaction to N: NONE
Acknowledge- NONE
ment for N:
- - - - - - - - - - - - - - - - - - - - - - - - - End of example - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Axxxxx Alarm xxxxx
Axxxxx (F, N) Alarm xxxxx (message type can be changed to F or N)
Fxxxxx Fault xxxxx
Fxxxxx (A, N) Fault xxxxx (report type can be changed to F or N)
Nxxxxx No message
Nxxxxx (A) No message (message type can be changed to A)
Cxxxxx Safety message (separate message buffer)
A report comprises a letter followed by the relevant number.
The meaning of the letters is as follows:
• A means "Alarm"
• F means "Fault"
• N means "No Report" or "Internal Report"
• C means "Safety message"
The optional brackets indicate whether the type specified for this report can be
changed and which report types can be adjusted via parameter (p2118, p2119).
Information about reaction and acknowledgement is specified independently for
a report with adjustable report type (e.g. reaction to F, acknowledgement for F).
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
Faults and Alarms
Overview of faults and alarms
3-1429