Table of Contents
Advertisement
222 Commissioning
Pos : 114 /Serie 750 (WAGO-I/O-SYST EM)/In Betri eb nehmen/Anz eigen der Mess werte mit WAGO-I/O-CHEC K, 3-Leiter-Stern/Drei ec k 750- 0495, - 0495/040-00x @ 31\mod_1522322175440_21.doc x @ 479884 @ 34444 @ 1
8.4.5
Displaying the Measured Values with WAGO-I/O-CHECK
8.4.5.1
"Overview" View
The "Overview" view continuously displays the measured values of all 3 phases .
These are:
•
A sum view of the 3 phases with active and reactive power, PF power
factor, active and reactive energy and neutral conductor current. Tamper
Detect (fault current detection) is marked with a red square if present and
with a green one if not.
•
Direction of rotation of the rotary field of the 3-phase network
•
Line-to-line voltage, frequency of each phase, currents of each phase,
including minimum, maximum and average values.
Overcurrent is marked with a red square if present and with a green one if
not.
Peak current and voltage values of the selected phase. If peak value
measurement is set to phase L2, the peak voltage value is not shown.
Figure 78: Measured Values – Overview
Manual
Version 1.2.0
750-495/040-00x 3-Phase Power Measurement Module 690 V
WAGO-I/O-SYSTEM 750 XTR
Advertisement
Chapters
Table of Contents
