Table 106: Parameter 25; Table 107: Parameters 26 And 27; Table 108: Parameters 28 And 29; Table 109: Parameters 30 And 31 - WAGO 750-495/040-00 Series Manual

WAGO-I/O-SYSTEM 750 XTR
750-495/040-00x 3-Phase Power Measurement Module 690 V

Table 106: Parameter 25

Overvoltage threshold, phase 3,
0: The overvoltage threshold check is deactivated.
≥ 1: Value of the overvoltage threshold.

Table 107: Parameters 26 and 27

Parameters 26 and 27 – Overcurrent Threshold Value Phase 1
Overcurrent threshold value, phase 1
0:
≥ 1:

Table 108: Parameters 28 and 29

Parameters 28 and 29 – Overcurrent Threshold Value Phase 2
Overcurrent threshold value, phase 2
0: The overvoltage threshold check is deactivated.
≥ 1: Value of the overvoltage threshold check.

Table 109: Parameters 30 and 31

Parameters 30 and 31 – Overcurrent Threshold Value Phase 3
Overcurrent threshold value, phase 3
0: The overvoltage threshold check is deactivated.
≥ 1: Value of the overvoltage threshold check.

Table 110: Parameters 32 and 33

Parameters 32 and 33 – Threshold Value Tamper Detect (Fault Current)
Threshold value (peak value), Tamper Detect,
≥ 0: Threshold value (peak value)
Parameter 25 – Overvoltage Threshold Value Phase 3
Function
Resolution: 0.1 V
Function
Resolution: 0.1 mA
The overvoltage threshold check is deactivated.
Value of the overvoltage threshold check.
Function
Resolution: 0.1 mA
Function
Resolution: 0.1 mA
Function
Resolution: 0.1 mA
Data Type Access
UINT R/W
Data Type Access
UINT R/W
Data Type Access
UINT R/W
Data Type Access
UINT R/W
Data Type Access
UINT R/W
Appendix 297
Factory Setting
0x1004 (410 V)
Factory Setting
0x0000C350
(5000 mA)
Factory Setting
0x0000C350
(5000 mA)
Factory Setting
0x0000C350
(5000 mA)
Factory Setting
0x0000000A
(1 mA)
Manual
Version 1.2.0