WAGO-I/O-SYSTEM 750 XTR
750-495/040-00x 3-Phase Power Measurement Module 690 V
8.4.5.2
"Harmonics" View
The "Harmonics" view provides both a graphical and a tabular overview of the
40 upper harmonics of the 3 phases.
When this view is selected, the "Analysis" context tab (next to "Start") opens;
here you can select either the diagram view or table view. You can also select
the phase to analyze and the measured quantity (voltage or current).
The Chart View displays:
•
Voltages (voltage L2 = voltage L1 + voltage L3) or currents of the 40 upper
harmonics (2nd to 41st harmonic)
•
Line frequency (current, maximum and minimum)
•
Total harmonic distortion – THD
Figure 79: Measured Values – Harmonics Diagram
Commissioning 223
Manual
Version 1.2.0