Factory Settings" Tab - WAGO 750-495/040-00 Series Manual

WAGO-I/O-SYSTEM 750 XTR
750-495/040-00x 3-Phase Power Measurement Module 690 V
8.3.5

"Factory Settings" Tab

On the "Factory Settings" tab, you can reset all parameters of the I/O module to
the factory settings after entering the password.
The initial password is "wago." After the first use, please change this password
using [Change password].
List of the factory settings
You can find a list of the factory settings in "Appendix" > "Factory Settings."
Module settings [Restore] restores only the I/O module settings.
•
Calibration data remains unaffected.
Calibration data [Restore] restores only the calibration data. The I/O
•
module settings remain unaffected.
• Total [Restore] can be used to restore all I/O module settings and
calibration data.
These actions are performed immediately and cannot be reverted.
Therefore, the [Save] button at the bottom of the window is disabled.
Commissioning 203
Manual
Version 1.2.0