Harmonics" View; Figure 69: Measured Values - Harmonics Diagram - WAGO 750-495/040-00 Series Manual

210 Commissioning
8.3.6.6

"Harmonics" View

The "Harmonics" view provides both a graphical and a tabular overview of the
40 upper harmonics of the 3 phases.
When this view is selected, the "Analysis" context tab (next to "Start") opens;
here you can select either the diagram view or table view. You can also select
the phase to analyze and the measured quantity (voltage or current).
The Chart View displays:
• Voltages or currents of the 40 upper harmonics (2nd to 41st harmonic)
• Line frequency (current, maximum and minimum)
• Total harmonic distortion – THD
Figure 69: Measured Values – Harmonics Diagram
Manual
Version 1.2.0
750-495/040-00x 3-Phase Power Measurement Module 690 V
WAGO-I/O-SYSTEM 750 XTR