Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750 XTR
750-495/040-00x 3-Phase Power Measurement Module 690 V
Table 114: Parameter 37
Parameter 37 – Interval Autom. Reset Min/Max Values Phase 1
Time constant for automatic deletion of minimum
and maximum values of phase 1, resolution 200
activation via register 32, bit 8 required
Table 115: Parameter 38
Parameter 38 – Interval Autom. Reset Min/Max Values Phase 2
Time constant for automatic deletion of minimum
and maximum values of phase 2, resolution 200
activation via register 32, bit 9 required
Table 116: Parameter 39
Parameter 39 – Interval Autom. Reset Min/Max Values Phase 3
Time constant for automatic deletion of minimum
and maximum values of phase 3, resolution 200
activation via register 32, bit 10 required
Table 117: Parameter 40 (Supported by Firmware Versions 05 and above)
NOLOAD threshold for effective power
0:
1 ... 30000:
Function
ms,
Function
ms,
Function
ms,
Parameter 40 – NOLOAD Threshold, Effective Power
Function
The NOLOAD threshold is disabled (factory setting)
Power threshold as NOLOAD limit value.
Resolution: 0.001 % / LSB (0.001 % to 30.000 %)
The threshold is specified as a % of the full scale of the power
750-495/040-000
750-495/040-001
750-495/040-002 RT500
750-495/040-002 RT2000
750-495/040-002 RC70
750-495/040-002 RC125
750-495/040-002 RC175
750-495/040-002 with user-defined RC: See the following section "Calculation of
the NoLoad Limit for User-Defined Rogowski Coils."
Data Type
Access
UINT
R/W
Data Type
Access
UINT
R/W
Data Type
Access
UINT
R/W
Data Type
Access
UINT
R/W
P
= 1,014.91 W
Fullscale
P
= 4,465.63 W
Fullscale
P
= 2,223,038.77 W
Fullscale
P
= 2,224,048.33 W
Fullscale
P
= 1,977,032.33 W
Fullscale
P
= 1,973,632.66 W
Fullscale
P
= 1,970,064.91 W
Fullscale
Appendix 299
Factory Setting
0x000A (2 s)
Factory Setting
0x000A (2 s)
Factory Setting
0x000A (2 s)
Factory Setting
0x0000 (disabled)
Manual
Version 1.2.0
Advertisement
Chapters
Table of Contents
