Neutral Conductor" Tab; Figure 86: "Neutral Conductor" Tab - WAGO 750-495/040-00 Series Manual

232 Commissioning
8.5.3

"Neutral Conductor" Tab

On the "Neutral Conductor" tab, parameterize the application scaling for the
neutral conductor and specify the threshold for Tamper Detect (fault current
detection).
Settings for Rogowski coils
If you are using Rogowski coils with the Rogowski version, user scaling cannot
be enabled. Thus, the transformation ratio is always 1:1. Otherwise, you would
obtain incorrect measured values.
These settings apply to the neutral conductor and are written to the I/O module
when saved.

Figure 86: "Neutral Conductor" Tab

Manual
Version 1.2.0
750-495/040-00x 3-Phase Power Measurement Module 690 V
WAGO-I/O-SYSTEM 750 XTR