Neutral Conductor" Tab; Figure 53: "Neutral Conductor" Tab - WAGO 750-495/040-00 Series Manual

WAGO-I/O-SYSTEM 750 XTR
750-495/040-00x 3-Phase Power Measurement Module 690 V
8.2.2

"Neutral Conductor" Tab

On the "Neutral Conductor" tab, parameterize the application scaling for the
neutral conductor and specify the threshold for the peak value of Tamper Detect
(fault current detection).
Settings for Rogowski coils
If you are using Rogowski coils with the Rogowski version, user scaling cannot
be enabled. Thus, the transformation ratio is always 1:1. Otherwise, incorrect
measured values will result.
These settings apply to the neutral conductor and are written to the I/O module
when saved.

Figure 53: "Neutral Conductor" Tab

Commissioning 187
Manual
Version 1.2.0