Inserting The I/O Module; Figure 13: Insert I/O Module (Example); Figure 14: Snap The I/O Module Into Place (Example) - WAGO 750-495/040-00 Series Manual

WAGO-I/O-SYSTEM 750 XTR
750-495/040-00x 3-Phase Power Measurement Module 690 V
6.2.1

Inserting the I/O Module

1. Position the I/O module so that the tongue and groove joints to the fieldbus
coupler/controller or to the previous or possibly subsequent I/O module are
engaged.

Figure 13: Insert I/O Module (Example)

2. Press the I/O module into the assembly until the I/O module snaps into the
carrier rail.

Figure 14: Snap the I/O Module into Place (Example)

Mounting 89
Manual
Version 1.2.0