Start" Ribbon; Measured Value Views" Menu - WAGO 750-495/040-00 Series Manual

180 Commissioning
8.1.2

"Start" Ribbon

The following options are available in the "Start" ribbon.
Button
[Disconnect]
[Snapshot]
[Settings]
[Calibration]
[Units]
8.1.3

"Measured Value Views" Menu

In the "Measured Value Views" menu, select the desired menu view. You can
also view general information on the I/O module.
You can find more information in section "Displaying the Measured Values with
WAGO-I/O-CHECK" for the respective measurement topology.
Manual
Version 1.2.0
750-495/040-00x 3-Phase Power Measurement Module 690 V
Function
Disconnects the fieldbus coupler/controller from the PC.
Opens a standard "Save As" dialog to save all measured
values, settings and error messages from the status bar
(3) as a CSV file. In this window, enter a file name and
select the storage location.
See the section "Appendix" for examples.
Opens the settings dialog.
Opens the calibration dialog. WAGO Support can provide
more information.
Opens a drop-down list of measuring units.
WAGO-I/O-SYSTEM 750 XTR