Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750 XTR
750-495/040-00x 3-Phase Power Measurement Module 690 V
Pos : 110 /Serie 750 (WAGO-I/O-SYST EM)/In Betri eb nehmen/Anz eigen der Mess werte mit WAGO-I/O-CHEC K, 4-Leiter-Stern 750-0495, -0495/040- 00x @ 16\mod_1376385381812_21.doc x @ 128592 @ 344444444 @ 1
8.3.6
Displaying the Measured Values with WAGO-I/O-CHECK
8.3.6.1
"Overview" View
The "Overview" view continuously displays the measured values of all 3 phases
and the neutral conductor. These are:
•
A sum view of the 3 phases with active, reactive and apparent power, PF
power factor, active, reactive and apparent energy and neutral conductor
current. Tamper Detect (fault current detection) is marked with a red square
if present and with a green one if not.
•
4-quadrant display for each phase
•
Direction of rotation of the rotary field of the 3-phase network
•
Current, Lx-N voltage, active, reactive and apparent power, cos phi, LF
power factor and frequency for each phase. Overcurrent, undervoltage and
overvoltage are marked with a red square if present and with a green one if
not.
Figure 64: Measured Values – Overview
Commissioning 205
Manual
Version 1.2.0
Advertisement
Chapters
Table of Contents
