Table of Contents
Advertisement
242 Commissioning
8.5.6.5
"Harmonics" View
The "Harmonics" view provides both a graphical and a tabular overview of the
40 upper harmonics of the 3 phases.
When this view is selected, the "Analysis" context tab (next to "Start") opens;
here you can select either the diagram view or table view. You can also select
the phase to analyze and the measured quantity (voltage or current).
The Chart View displays:
•
Voltages (only L1 or L3) or currents of the 40 upper harmonics (2nd to 41st
harmonic)
•
Line frequency (current, maximum and minimum)
•
Total harmonic distortion – THD
Figure 94: Measured Values – Harmonics Diagram
Manual
Version 1.2.0
750-495/040-00x 3-Phase Power Measurement Module 690 V
WAGO-I/O-SYSTEM 750 XTR
Advertisement
Chapters
Table of Contents
