Configuration And Parameterization With Wago-I/O-Check; Table 138: Settings Using Tools - WAGO 750-489 Manual

122 Commissioning

Table 138: Settings Using Tools

Settings
Channels enabled/
disabled input signals
Process image
Siemens S5 format
Temperature unit
Number format
Resolution
Interference frequency
suppression
Smoothing
Compensation resistor
Diagnostics (on/off)
Channel diagnostics
Diagnosis: overflow
Diagnosis: underflow
Diagnosis:
measurement underrange
Diagnosis:
measurement overrange
Diagnosis/process alarm:
lower user limit value
Diagnosis/process alarm:
upper user limit value
User limit values
Scaling
Calibration
7.1 Configuration and Parameterization with
WAGO-I/O-CHECK
The I/O Module 750-489 is supported by the WAGO-I/O-CHECK commissioning
tool staring with version 03.22.01(01).
WAGO-I/O-CHECK can be used to conveniently and completely configure and
parameterize the I/O module. You have the following options:
• Graphical representation of the fieldbus node
• Display of the measured values
• Settings for the application
• Configuration of the I/O module operating modes
• Parameterization of module, channel and scaling settings
• Calibration of channels and adjustment of analog inputs
• Monitoring
Manual
Version 1.1.0, valid from FW Version 02
750-489 4AI RTD/TC/Strain Gauge Ex i
WAGO-I/O-
e!COCKPIT
CHECK
× ×
- -
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
WAGO-I/O-SYSTEM 750
GSD GSDML
× ×
× ×
× ×
× ×
× ×
× ×
× ×
× ×
- ×
× ×
× ×
- ×
- ×
- ×
- ×
- ×
- ×
- ×
- ×
- -