Removing The I/O Module; Figure 15: Removing The I/O Module (Example) - WAGO 750-495/040-00 Series Manual

90 Mounting
With the I/O module snapped in place, the electrical connections for the data
contacts and power jumper contacts (if any) to the fieldbus coupler/controller or
to the previous or possibly subsequent I/O module are established.
Pos : 83 /Serie 750 ( WAGO-I/O-SYST EM)/M ontieren/D emontier en/XTR-I/O-Modul entfer nen @ 28\mod_1486551166032_21.doc x @ 405491 @ 3 @ 1
6.2.2

Removing the I/O Module

1. Remove the I/O module from the assembly by pulling the release tab.

Figure 15: Removing the I/O Module (Example)

Electrical connections for data or power jumper contacts are disconnected when
removing the I/O module.
Pos : 84 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1
Manual
Version 1.2.0
750-495/040-00x 3-Phase Power Measurement Module 690 V
WAGO-I/O-SYSTEM 750 XTR