WAGO 750-495/040-00 Series Manual page 66

66 Process Image
STAT2
STAT1
Bit 7
COL_ID_SEL
Manual
Version 1.2.0
750-495/040-00x 3-Phase Power Measurement Module 690 V
If STAT_SEL = status of Lx = L1 / L2 / L3:
- Clipping of current signal at Lx:
0 = OK
1 = the current signal is outside the measurable
range of the I/O module and has been
limited (clipped).
If STAT_SEL = status of I/O module:
- no significance
If STAT_SEL = status of Lx = L1 / L2 / L3:
- Underrun of the ZC limit at Lx:
0 = OK
1 = greater measurement error due to
underrun of the required
input nominal voltage at Lx
If STAT_SEL = status of I/O module:
- no significance
Bit 6 Bit 5 Bit 4
Index of the selected measured value collection (see also
COL_ID in output data):
000 ... 009 = -reserved-
010
011 ... 019 = -reserved-
020
021
022
023 ... 255 = -reserved-
WAGO-I/O-SYSTEM 750 XTR
Byte 3
Bit 3
COL_ID_SEL
= AC measured values
= harmonic analysis, L1
= harmonic analysis, L2
= harmonic analysis, L3
Bit 2 Bit 1 Bit 0