Table 33: Legend For Figure "Connection Schematic For Grounded Single-Phase Split-Phase Network For Power Measurement For - WAGO 750-495/040-00 Series Manual

116 Connect Devices
Figure 26: Connection Schematic for Grounded Single-Phase Split-Phase Network for Power
Measurement for U
Table 33: Legend for Figure "Connection Schematic for Grounded Single-Phase Split-Phase Network
for Power Measurement for U
No. Explanation
1 Generator:
Generator or transformer in single-phase split-phase connection, with
neutral conductor grounding
2 Current transformer (CT3) for current measurement in the neutral
conductor (optional)
3 Loads with impedances (Zx):
- Load connection: in split-phase connection
- Load type: all variants
4 Connection terminal N:
Reference potential for all voltage inputs and differential current inputs
5 Connection terminal L2:
Connection to the N connection (optional, to avoid erroneous measured
values for the unused phase)
Manual
Version 1.2.0
750-495/040-00x 3-Phase Power Measurement Module 690 V
U ≤ 480 V
L1, L2 RMS
U ≤ 480 V
L1, L2
WAGO-I/O-SYSTEM 750 XTR
"
RMS