Changing Memory Switch; Figure 4-1 Properties Of Printer Driver - Seiko RP-F10 Series Technical Reference

4.1.1

Changing Memory Switch

(1) Change Procedures
There are following 4 ways to change the MS.
• Using the memory switch setting tool
As shown in the figure below, utilize the memory switch setting utility from the printer driver
property.
For details, see "SII Printer Setting Utility for Windows User's Guide" for RP-F10/G10 Series.
• Using the "Change Function Settings" command (DC2 'k', DC2 'w')
See DC2 'k', DC2 'w' in "6.5.10 Auxiliary Functions".
• Using the "Set Communication Default Value" command (DC2 'i')
See DC2 'i' in "6.5.10 Auxiliary Functions".
• Using the switches
The MS can be changed manually using the printer's POWER Switch and FEED Switch.
The procedures are described in the following pages.

Figure 4-1 Properties of Printer Driver

4-2