Chapter 3 Interface; Usb + Usb Host Model; Usb Interface; Table 3-1 General Specifications Of Usb Interface - Seiko RP-F10 Series Technical Reference

This chapter describes specifications of each interface required for connecting host devices and peripheral
devices with the printer.
The amount of the input buffer in the printer is 4096 bytes.
The amount of the output buffer is 256 bytes.

3.1 USB + USB HOST MODEL

The USB + USB host model provides both USB and USB host interfaces, and it can be used in the following
ways:
• The USB interface is used for data communication with the host device, and the USB host interface is
used for data communication with peripheral device such as the display. Peripheral device can
communicate data with the host device through the printer.

3.1.1 USB Interface

(1) General Specifications
USB version
Communication speed
Communication protocol
CHAPTER 3
INTERFACE

Table 3-1 General Specifications of USB Interface

Item
Ver. 2.0
Printer device class 1.1
Full speed (12 Mbps)
Bulk transfer
Specifications
3-1