Print Position - Seiko RP-F10 Series Technical Reference

y: vertical print area
Notes This command is valid only in the standard mode.
This command is valid only when input at the beginning of the line. Otherwise it is ignored.
When the horizontal or vertical size is smaller than the size of NV graphics data
corresponding to the key code, the data is not printed. When the horizontal size is specified
outside the definition range, it is automatically adjusted to the maximum value.
The meaning of n is as stated below.
The setting outside the range is ignored.
Related Commands GS '(' 'L'
w: horizontal print area
(1)
(4)
(7)
n: watermark print position
n

Print Position

1 Upper left
2 Upper center
3 Upper right
4 Center left
5 Center
6 Center right
7 Lower left
8 Lower center
9 Lower right
6-56
(2)
(3)
(5)
(6)
(8) (9)
paper