Gs 'P' 4 0 N [D]N Print Gs1 Databar Stacked - Seiko RP-F10 Series Technical Reference

Function Prints MaxiCode data on the basis of the specified contents.
sc:
cc:
pc:
n, m:
d:
k:
Notes When n or m is out of the definition range, the subsequent data is processed as normal data.
Moreover, the maximum data value will be less than the maximum value of n or m depending
on the mode, and when any data exceeding the maximum value is specified, the whole
command is discarded.
When the barcode size exceeds the print area, this command is ignored.
In the standard mode, when there is data in the line buffer, this command is ignored.
In the standard mode, alignment and inversion (flip) printing are valid.
The print size of the barcode is fixed in vertical 213 dots × horizontal 225 dots.
Quiet zones are not secured. Set the quiet zone in accordance with the standard of each
barcode system.
The Structured Append is not supported.
Related Commands ESC 'a', ESC '{'
GS 'p' 4 0 n [d]n
Code 1DH 70H 04H 00H n [d]n
Definition Range
Function Prints GS1 Databar Stacked data on the basis of the specified contents.
n: Number of data bytes
d: Input data of GS1 Databar
Enter 13 characters using numbers from '0' to '9'.
'01' at the beginning is automatically added, and the check digit is automatically calculated
by the printer.
Notes When any value out of the definition range is specified, this command is ignored, and the
subsequent data is processed as normal data.
When the horizontal width of GS1 Databar exceeds the print area, this command is ignored.
In the standard mode, when there is data in the line buffer, this command is ignored.
In the standard mode, alignment and inversion (flip) printing are valid.
Related Commands ESC 'a', ESC '{'
Service class
In mode 2 and mode 3, specify sc in 3-digit numerals.
Country code
In mode 2 and mode 3, specify cc in 3-digit numerals.
Postal code
In mode 2, specify the postal code in 9-digit numerals. In order to specify less than
9 digits, specify data other than numerals for the remaining digits.
In mode 3, specify the postal code in 6 alphanumeric characters. When the postal
code is less than 6 characters, specify space for the remainder.
Number of data bytes
Barcode data
Number of data bytes specified by n or m
n = 13, 48 ≤ d ≤ 57
6-72
Print GS1 Databar Stacked