Gs '/' M Print Downloaded Bit Image; Gs '/' M N; Select Downloaded Bit Image - Seiko RP-F10 Series Technical Reference

<Column scan mode>
X=x × 8
(1)GS '/' m

(2)GS '/' m n

Code (1)1DH 2FH m
(2)1DH 2FH m n
Definition Range
Function Prints the registered downloaded bit image data in mode m.
When 4 ≤ m ≤ 7 or 52 ≤ m ≤ 55, the print start position in the horizontal direction of the
downloaded bit image can be specified by n. (The print start position is specified at the
position of n × 8 dots from the left end of the paper.)
Notes This command is ignored when the downloaded bit image data is not registered.
In the standard mode, this command is valid only when there is no data in the line buffer.
The print modes (bold printing, double strike printing, underline, character size, etc.) excluding
inversion (flip) printing have no effect. The inversion (flip) printing is invalid in the "Select
Downloaded Bit Image" command (GS '/').
When the size of the registered downloaded bit image data exceeds the print area, the excess
data is not printed.
MSB
7
6
5
4
3
2
1
LSB
0
(1)0 ≤ m ≤ 3, 48 ≤ m ≤ 51
(2)4 ≤ m ≤ 7, 52 ≤ m ≤ 55, 0 ≤ n ≤ 255
m
0, 48 Normal mode printing
1, 49 Double width mode printing
2, 50 Double height mode printing
3, 51 Quadruple mode printing
4, 52 Normal mode selection
5, 53 Double width mode selection
6, 54 Double height mode selection
7, 55 Quadruple mode selection
<Row scan mode>
X=x × 8
d1
d(x+1) d(x+2)
5 4
7 6
MSB

Select Downloaded Bit Image

Function
6-46
d2
d(x × 2)
d(x × y × 8)
2 1 0
3
LSB
Print Downloaded Bit Image
dx