Esc '%' N Specify/Cancel Downloaded Character Set; Esc '?' N Release Downloaded Character; Dc2 'D' N Release/Allocate Downloaded Character Area - Seiko RP-F10 Series Technical Reference

ESC '%' n
Code 1BH 25H n
Definition Range
Default n = 0
Function Specifies or cancels the downloaded character.
When n = <*******0>B, the downloaded character is canceled.
When n = <*******1>B, the downloaded character is specified.
Notes Only the LSB is valid for n.
When the downloaded character is canceled, the internal character set is automatically
specified.
Related Commands ESC '&', ESC '?'
ESC '?' n
Code 1BH 3FH n
Definition Range
Function Releases the downloaded character of the specified code to make it undefined. After releasing,
the printer prints the internal character.
n: Character code to release registration pattern
Notes The downloaded character specified by the character code n is released. The character font
selected by the "Specify Print Mode" command (ESC '!') is affected.
When the specified character code is undefined, this command is ignored.
Related Commands ESC '&', ESC '%'
DC2 'D' n
Code 12H 44H n
Definition Range
Function Releases or allocates the downloaded character area.
When n = <*******0>B, the downloaded character area is released.
When n = <*******1>B, the downloaded character area is allocated.
Notes Only the LSB is valid for n.
When releasing the downloaded character area, the registered downloaded characters are
deleted, and the downloaded character specification is canceled. Moreover, the "Register
Downloaded Character" command (ESC '&') and the "Specify/Cancel Downloaded Character
Set" command (ESC '%') are ignored.
The downloaded character area is 6184 bytes.
In order to allocate again the downloaded character area that has been released, 6184 bytes
or more are necessary for the remaining memory capacity. When the remaining memory
capacity is insufficient, the downloaded character area is not allocated, and this command is
ignored.
Releasing the area cannot increase the remaining memory capacity. The area can be used
again as the user area by the "Defragment User Area" command (DC2 '*' '1').
0 ≤ n ≤ 255
20H ≤ n ≤ 7EH
0 ≤ n ≤ 255
Specify/Cancel Downloaded Character Set
Release Downloaded Character
Release/Allocate Downloaded Character Area
6-31