Bluetooth + Usb Host Model; Bluetooth Interface; Figure 3-6 Bluetooth Interface; Table 3-14 General Specifications Of Bluetooth Interface - Seiko RP-F10 Series Technical Reference

3.3 BLUETOOTH + USB HOST MODEL

3.3.1 Bluetooth Interface

(1) General Specifications
Bluetooth version
Transmission power class
Authentication
Profile
*
PIN code
Device name
*: Changeable by "Set Communication Default Value" command (DC2 'i').
(2) Pairing
When MS39-3 (Inquiry Response Selection) is set to Pairing Mode in the Function Settings, the printer
enters pairing mode for about 60 seconds by pushing the power switch for 7 seconds or more with the
printer off state.
When the pairing mode starts, the LED blinks twice per second, and the printer can pair with the
Bluetooth host device.
When Bluetooth connection is established during the pairing mode, the printer exits the pairing mode.
When Inquiry Response is set to Always in the Function Settings, pairing is always available because
the printer responds anytime to the search from the Bluetooth host device.
For Android terminal, pairing is possible using NFC or QR Code.
In that case, our utility software is required.
Download utility software from Google Play, and install on a host device.

Table 3-14 General Specifications of Bluetooth Interface

Item
Ver. 3.0
Class 2
SSP, PIN code
SPP, iAP2
0000 (at the shipping)
*
RP-F10 (at the shipping)

Figure 3-6 Bluetooth Interface

Specifications
3-10