Set Qr Code Module Size; Select Qr Code Error Correction Level - Seiko RP-F10 Series Technical Reference

Function Selects the QR Code model.
Notes This command is ignored when any value out of the definition range is specified.
This setting does not affect GS 'p' 1.
Related Commands GS '(' 'k', GS 'p' 1
GS '(' 'k' pL pH cn fn n1 n2
Code 1DH 28H 6BH pL pH cn fn n
Definition Range
Default n = 3
Function Specifies the QR Code module size.
n: Number of dots for 1 side of the module size
Notes This command is ignored when any value out of the definition range is specified.
This setting affects DC2 ';'.
Related Commands GS '(' 'k', DC2 ':'
GS '(' 'k' pL pH cn fn m
Code 1DH 28H 6BH pL pH cn fn m
Definition Range
Default m = 48
Function Selects the QR Code error correction level.
M
48
49
50
51
Notes This command is ignored when any value out of the definition range is specified.
This setting does not affect GS 'p' 1.
Related Commands GS '(' 'k', GS 'p' 1
n1 Model
49 Model 1
50 Model 2
pL = 3, pH = 0
cn = 49
fn = 67
2 ≤ n ≤ 16
pL = 3, pH = 0
cn = 49
fn = 69
48 ≤ m ≤ 51
Error correction level
Error correction level L
Error correction level M
Error correction level Q
Error correction level H

Select QR Code Error Correction Level

6-74

Set QR Code Module Size