Set Qr Code, Data Matrix Module Size; Gs 'P' 1 Model E V Mode Nl Nh [D]K; Print Qr Code - Seiko RP-F10 Series Technical Reference

DC2 ';' n
Code 12H 3BH n
Definition Range
Default n = 6
Function Specifies the module size of QR Code, Data Matrix, GS1 Databar Stacked, GS1 Databar
Stacked Omni-directional, and GS1 Databar Expanded Stacked.
n: Number of dots for 1 side of the module size
Related Commands GS 'p' 1, GS 'p' 2, GS 'p' 4

GS 'p' 1 model e v mode nl nh [d]k

Code 1DH 70H 01H model e v mode nl nh [d]k
Definition Range
Function Prints QR Code data on the basis of the specified contents.
model:
e:
v:
mode:
nl, nh:
d:
k:
Notes When any value out of the definition range is specified, this command is ignored, and the
subsequent data is processed as normal data.
The maximum value should be 7089 bytes or less depending on the model, the mode, and
the error correction level. When any data exceeding the maximum value is specified, the data
is discarded.
When the horizontal width of QR Code exceeds the print area, this command is ignored.
2 ≤ n ≤ 16
model = 01H, 02H
e = 4CH, 4DH, 51H, 48H
v = 0, 1 ≤ v ≤ 40
mode = 4EH, 41H, 42H, 4BH, 4DH
1 ≤ k(= nh × 256 + nl) ≤ 7089
Model
Error correction level
'L'(4CH), 'M'(4DH), 'Q'(51H), 'H'(48H)
Version
When v = 0, the version is automatically selected (depending on the number of
input data bytes).
When 1 ≤ v ≤ 40, the version is fixed (up to 14 when model-1 is selected).
Mode of data
mode Hexadecimal
N 4E
A 41
B 42
K 4B
M 4D
Number of data bytes
QR Code input data
When using 2-byte code (such as Kanji and Hiragana), it should be input by
Shift-JIS.
Number of data bytes specified by nl and nh

Set QR Code, Data Matrix Module Size

Mode of data
Numerical mode
Alphanumeric mode
8-bit byte mode
Kanji mode
Mixed mode
6-70

Print QR Code