Set Iserialnumber; Set Communication Default Value - Seiko RP-F10 Series Technical Reference

DC2 'u' 1 [d]k NUL
Code 12H 75H 01H [d]k 00H
Definition Range
Function Sets any character string to iSerialNumber.
The character string can be set with 1 to 10 characters.
'0' to '9' (30H to 39H), 'A' to 'Z' (41H to 5AH) and 'a' to 'z' (61H to 7AH) can be specified for d.
Notes When multiple printers use the same iSerialNumber, do not connect the printers to the host at
the same time.
Do not set characters other than 1-byte characters.
It may break the FLASH memory when this command is frequently used.
Use this command only when the printer is installed, and do not use it during normal
operation.
DC2 'i' m [d]k
Code 12H 69H m [d]k
Definition Range
Function Sets, clears, and reads Bluetooth.
This command is valid only for Bluetooth model.
m
33H Initializing Bluetooth device name
34H Reading out Bluetooth device name None
35H Setting Bluetooth device name
37H Initializing Bluetooth PIN code
38H Setting Bluetooth PIN code
Bluetooth device name can be set in 2 bytes to 32 bytes character string.
The Bluetooth device name setting is completed when the number of setting data bytes
exceeds 32 bytes or NULL is detected in the setting data.
When the number of setting data bytes exceeds 32 bytes, the 33rd character is considered as
NULL character, and the following data is processed as character code.
When the number of setting data bytes is less than 2 bytes, it is ignored.
By reading out Bluetooth device name, the printer transmits the specified Bluetooth device
name to the host device from the beginning in order. The completion of data transmission is
signaled by transmitting NULL character.
By initializing Bluetooth device name, the specified Bluetooth device name can be restored to
the state at the shipping.
Bluetooth PIN code can be set in 4 bytes to 16 bytes character string.
d: 1-byte alphanumeric character
1 ≤ k ≤ 8
m: 33H to 35H, 37H to 38H
d: 20H, 23H, 2AH, 2BH, 2DH, 30H to 39H, 41H to 5AH, 5Fh, 61H to 7AH
Function

Set Communication Default Value

Data
None
2 ≤ k ≤ 32 bytes + NULL
character
None
4 ≤ k ≤ 16 bytes + NULL
character
6-104

Set iSerialNumber

Default
RP-F10
-
-
0000
-