Esc '{' N Specify/Cancel Inversion (Flip) Print; Gs 'B' N Specify/Cancel Reverse Print - Seiko RP-F10 Series Technical Reference

ESC '{' n
Code 1BH 7BH n
Definition Range
Default n = 0
Function Specifies or cancels inversion (flip) printing.
When n = <*******0>B, inversion (flip) printing is canceled.
When n = <*******1>B, inversion (flip) printing is specified.
Notes Only the LSB is valid for n.
This command is valid only when input at the beginning of the line.
When page mode is selected, inputting this command executes only the internal flag
operation of the printer.
The setting of this command does not affect the page mode.
The inversion (flip) printing is to rotate the data of the line 180° and print.
This command affects both 1-byte characters and 2-byte characters.
GS 'B' n
Code 1DH 42H n
Definition Range
Default n = 0
Function Specifies or cancels reverse printing of characters.
When n = <*******0>B, reverse printing is canceled.
When n = <*******1>B, reverse printing is specified.
Notes Only the LSB is valid for n.
Internal characters and downloaded characters are affected by the reverse printing.
The right space of the character set by the "Set Character Right Spacing" command (ESC SP)
is also affected by the reverse printing.
The reverse printing does not affect the followings:
Bit image (ESC '*')
Downloaded bit image (GS '/')
Barcode (GS 'k')
HRI character (GS 'H')
Portion skipped by Horizontal Tab (HT)
Portion skipped by Specify Absolute Position (ESC '$')
Portion skipped by Specify Relative Position (ESC '\')
NV graphics (GS '(' 'L')
Graphics Data Storage into Print Buffer (GS '(' 'L')
Each two-dimensional barcode print (GS 'p')
This command does not affect spaces between lines.
The specifications of bold printing and double strike printing are ignored. (The line width of a
reverse print character is as same as that of a normal character.)
The reverse printing takes precedence over underline. Therefore, even when underline is
specified, no underline is applied to reverse print characters. However, the underline setting
status does not change.
This command affects both 1-byte characters and 2-byte characters.
0 ≤ n ≤ 255
0 ≤ n ≤ 255
Specify/Cancel Inversion (Flip) Print
Specify/Cancel Reverse Print
6-26