Figure 3-3 Screen Of [Driver Type] Tab In Communication Settings Utility - Seiko RP-F10 Series Technical Reference

(7) USB Device Class
It is possible to set the USB Device Class to either "Printer Class" or "Vendor Class".
To set the USB Device Class, there are the following 2 ways:
• Using the utility
Use Communication Settings Utility in "Communication Software Package for RP Series Printer"
to set the Driver Type.
Printer Class:
Vendor Class:
See "RP Series Communication Software User's Guide" for supported OS.

Figure 3-3 Screen of [Driver Type] Tab in Communication Settings Utility

• Using the switches
It is possible to change the settings by the switch operation.
See "(2) How to Set the Function Using the Switches" in "4.1.1 Changing Memory Switch".
Select [11: I/F Setting] for the Setting Mode.
Printer Driver
Virtual Serial Port Driver
3-4