Fs 'C' N Select Kanji Code System; Fs 'S' N1 N2 Set Kanji Spacing - Seiko RP-F10 Series Technical Reference

FS 'C' n
Code 1CH 43H n
Definition Range
Default MS13-1 (Kanji Code System Selection) is JIS code: n = 0
MS13-1 (Kanji Code System Selection) is Shift-JIS code: n = 1
Function Selects the Kanji code system.
Notes The Kanji codes valid in the JIS code system are as follows:
The 1st byte:
The 2nd byte: 21H to 7EH
The Kanji codes valid in the Shift-JIS code system are as follows:
The 1st byte: 81H to 9FH, E0H to EFH, and FAH to FCH
The 2nd byte: 40H to 7EH and 80H to FCH
FS 'S' n1 n2
Code 1CH 53H n1 n2
Definition Range
Default n1 = 0, n2 = 0
Function Sets the left spacing (n1) and the right spacing (n2) of Kanji.
The left space is [n1 × basic calculation pitch] inches, and the right space is [n2 × basic
calculation pitch] inches.
Notes When specifying double width, the right and left spaces double from the setting amount.
The basic calculation pitch is set by the "Set Basic Calculation Pitch" command (GS 'P').
Moreover, once set, the Kanji spacing is not changed even when the basic calculation pitch is
changed by the "Set Basic Calculation Pitch" command (GS 'P').
When the result calculated by the "Set Basic Calculation Pitch" command (GS 'P') is a
fractional figure, it is corrected using the minimum pitch of the printer, and the remainder is
discarded.
It is possible to set the independent spacing for the standard mode and the page mode.
In the standard mode, the horizontal basic calculation pitch (x) is used.
In the page mode, the basic calculation pitch used is as follows depending on the starting
point.
(1) When the starting point is specified as "upper left" or "lower right" by "Select Print
Direction in Page Mode" command (ESC 'T'), the horizontal basic calculation pitch (x) is
used.
(2) When the starting point is specified as "upper right" or "lower left" by "Select Print
Direction in Page Mode" command (ESC 'T'), the vertical basic calculation pitch (y) is
used.
n = 0, 1, 48, 49
n
0, 48 JIS code system
1, 49 Shift-JIS code system
21H to 7EH and 93H to 97H
0 ≤ n1 ≤ 255, 0 ≤ n2 ≤ 255
Function
6-78
Select Kanji Code System
Set Kanji Spacing